Sunday, September 20, 2009
> How to Check the DRIVES for errors?
How to Defragment the Hard Drive?
Tuesday, July 15, 2008
> How to Save Power on a Laptop?
1. Be sure to make the brightness of your computer to the lowest setting that is comfortable. To do this, look for a purple "fn" button on the keyboard(usually next to the left ctrl key, sometimes the key has blue lettering instead of purple). After you've found the "fn" button, quickly search for another key with a purple or blue sun with an up or down arrow(usually on the arrow keys or on one of the F1-F12 keys). Now while holding "fn" press the button with the purple/blue sun and a down arrow.
2. Turn off all background programs that are not needed because they take up processor space which will use more battery.
3.Check that bluetooth and/or wireless adapter is off (if it's built in).
4. Be sure to eject any discs out of your CD or DVD drive if you do not need them. The disc will still be spinning inside and consumes a ton of energy.
5. If you are running very low on power, or are watching a DVD, your laptop may have a way to turn off the LED lights (Power light, hard drive activity light, etc.). Check your owners manual to see how.
6. Unplug any USB devices you are not using (iPods, Flash Drives, External USB mice, etc.). Many of these devices draw power from your USB port, up to 500 mA (about a half an Amp) and 5 volts. It adds up quickly depending on how many you have plugged in.
7. When you are not going to use your laptop for a short time, put it into standby or sleep mode. This will only leave dire essential components in the computer running such as the memory. And allow you to resume working on your computer quickly.
8. When you are not going to be using your laptop for a even longer time, put it into hibernate mode. It will have the same effect as turning the computer off, but it will allow you to go back to working on your laptop just like in standby and uses little to no power from the battery.
> How to Break a BIOS Password?
1. Power off the computer and make sure that it is unplugged.
2. Open up your computer case. You need physical access to the motherboard to complete this procedure.
3. Find a circular, (mostly) silver metallic object on the motherboard.
This is the CMOS battery.
4. CAREFULLY remove the CMOS battery and leave it out for about 120 seconds. This will flush the CMOS memory which stores the BIOS password and all other configuration. (See Warinings)
5. Set the battery back into place and power on the computer.
6. The computer should then warn you that the CMOS configuration could not be found. You can either reconfigure it yourself or restore defaults. Restoring the default configuration should be fine.
7. You will notice that the BIOS password has been cleared and you can boot without it. You may reset the BIOS password to something else by going into the BIOS configuration and setting a new User Password (The Supervisor Password controls access to the BIOS, NOT the computer!)
For Laptop:
1. Remember that laptops can be trickier, especially if it's a newer model. If it has a security chip on the motherboard forget about it. You either have to physically remove the chip or contact the mfg for the "master" password. If you can boot up off of a cd or floppy try any of these methods:
2. Create a Win98SE bootable media "or anything that lets you boot into MS-DOS" and boot off of it.
3. When the A:\> prompt appears type debug and press enter.
4. You will then only see a "-".
5. Type o 70 2E "include the spaces" and press Enter.
6. Type o 71 ff "include the spaces" and press Enter.
7. Type q and press Enter.
8. Here are a list of common mfg backdoor passwords:
AWARD BIOS :
AWARD SW, AWARD_SW, Award SW, AWARD PW, _award, awkward, J64, j256, j262, j332, j322, 01322222, 589589, 589721, 595595, 598598, HLT, SER, SKY_FOX, aLLy, aLLY, Condo, CONCAT, TTPTHA, aPAf, HLT, KDD, ZBAAACA, ZAAADA, ZJAAADC, djonet, %øåñòü ïpîáåëîâ%, %äåâÿòü ïpîáåëîâ%
AMI BIOS:
AMI, A.M.I., AMI SW, AMI_SW, BIOS, PASSWORD, HEWITT RAND, Oder
9. Other passwords you may try (for AMI/AWARD or other BIOSes) - LKWPETER, lkwpeter, BIOSTAR, biostar, BIOSSTAR, biosstar, ALFAROME, Syxz, Wodj
Tips:
1. Depending on the manufacturer of your motherboard, you may be able to use what it is called a "backdoor password" to bypass the password problem. Try looking at the external links for possible passwords.
2. Remember that passwords are Case Sensitive. The last two passwords in the AWARD BIOS list are in Russian.
3. Sometimes the bios reset jumper has a "handle" and is colored a bright color to make it easy to locate. Also, look in your case near the bottom. If it is a manufactured computer then it probably came with a little sticker with the jumpers and the location of the reset jumper.
Warnings:
1. In rare cases, the battery may be soldered into the motherboard and very difficult to remove. If this is true, you may need to find a jumper near the battery that achieves the same result. If you don't know which jumper it is, you CAN test them all. Unplug (really unplug, not just power off) the computer, and start a methodical change in all the jumpers positions, change one, count to ten, change it back, move on the next. After completing the lot of them (on older motherboards this could take a while) plug the PS back in, and boot up. You may risk damaging your computer with this procedure if you are not careful.
2. Some notebooks such as IBM's ThinkPad render useless when the BIOS password is being tried to reset.
3. Don't just start pulling jumpers on the motherboard. Make sure you know where it was and in what position in case anything goes wrong put it back.
4. If you turn your computer on and it makes strange noises / beeps, you should contact the vendor, manufacture, or a tech guy to fix it.
Sunday, June 1, 2008
> Long delay before files appear in My Computer in Windows XP?
SYMPTOMS
CAUSE
| • | Windows Image Acquisition (WIA) |
| • | HP ScanJet 4400C/4470C |
| • | HP ScanJet 5400/5470C |
| • | RCA DCM 215 DSL Modem |
| • | Cable Modem (model unknown) |
RESOLUTION
Windows Image Acquisition
Stop the WIA service. To do so, follow these steps:| 1. | Click Start, and then click Control Panel. |
| 2. | Double-click Administrative Tools. |
| 3. | Double-click Component Services. |
| 4. | Click Services. |
| 5. | In the Services (Local) list, right-click Windows Image Acquisition (WIA), and then click Stop. |
HP ScanJet 3400C
Unplug the HP ScanJet 3400C from the Universal Serial Bus (USB) port, and then restart Microsoft Windows XP.HP ScanJet 5400/5470C
Unplug the HP ScanJet from the USB port, and then restart Microsoft Windows XP.RCA DCM 215 DSL Modem
Unplug all other USB devices when you use this modem.Cable modem (model unknown)
Unplug all other USB devices when you use your USB cable modem.The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.
To accomplish this via command-line:
Click Start, Run and type CMD and press Enter
Run these commands one by one and press Enter:
NET STOP STISVC (This stops the service)
SC CONFIG STISVC START= DISABLED (This sets the Service startup type to disabled)
APPLIES TO
| • | Microsoft Windows XP Professional Edition |
| • | Microsoft Windows XP Home Edition |
Thursday, May 29, 2008
> How to Record sound or song with out Microphone?
Things You’ll Need:
Jet audio(available for free)
Sound card installed in Computer(We will talk about it)
Step1:
This is First Step , You are going to check that whether sound card is installed in your computer or not ,to record a sound with out microphone still need sound card because in other case computer will not be able to understand and do something with sound instead computer can make beebs without a card...To check Go to Start Menu>setting>Control Panel>Sounds and Audio Devices then Options like Advance and Mute look enabled and you can change them Its mean you have your Sound Card Installed otherwise first install sound card ,If you have then you can move ahead.
Step2:
Now About Jet Audio this is the programme we are going to use for recording because of its wonderful features ,To install Go to Download.com and search for jet audio and download it. If you don't find then copy paste this url into address bar above from here : http://dw.com.com/redir?edId=3&siteId=4&oId=3120-20_4-0&ontId=20_4&lop=link&tag=tdw_dltext<ype=dl_dlnow&pid=10783427&mfgId=56361&merId=56361&destUrl=http%3A%2F%2Fwww.download.com%2F3001-2167_4-10783427.html ..............This Programme is going to help in recording.
Step3:
Now Run Jet Audio then hit the button Record and then from source list choose Mono Mix/Stereo Mix then start the song you want to record then click on the start button recording window and click stop button when you wish to stop the sound ,Sound will be saved in My Documents or the folder you assigned in target section.
Step4:
Jet audio is also useful for other stuff but for recording a sound without Microphone is best ,Make sure you hear your sound once to make sure it is recorded as you wanted and Now In Final Rate It I will be glad to help you by answering your comments
Note:
Jet Audio Produce Wav File like sound.wav i recommend to convert this into Mp3 File like sound.mp3 ,To convert visit download.com and search for wav to mp3 converter and here you go.It will help to minimize the size of File about 90%.
> How to Install DHCP Server in Windows?
Things You’ll Need:
- DNS server
- Computer
Step2
Step3
Step4
Step5
Step6
Step7
Step8
Tuesday, May 13, 2008
> Use pc as an alarm
Start>
Programs >
Accessories >
System tools >
Scheduled tasks
Create a new task and choose program as windows media player or winamp (May work with others too but I haven't tried anything else) Choose "daily", Enter the time and choose "every day" at next screen. It would now ask for password (leave blank in case you don't have one) Right click on the newly created task and check the "run only if logged in" check box. In the properties. Append the path to the playlist you created in the "run" text box. It should now look like Code:
"D:\windows mediaplayer\wmplayer.exe"K:\Playlists\smoothies.m3uthe text inside quotes is my WMP's path. It may vary for you. The text after WMP's path is the one to the playlist. Click OK and you're done.
> How to DISABLE PEN DRIVE or THUMB DRIVE?
Expand
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro
Add a new key and name it "StorageDevicePolicies".
In the window on the right then create a new DWORD value and label it WriteProtect, give it a value of "1" and users can no longer write to USB drives.
Giving a value of "0" will allow to write again
> How to Reverse the mouse buttons
What will you see when you right click on the desktop? You will see a context menu which says arrange icons, refresh,..and so on. Are you angry at your friend for not wishing you for you B'day? Do you wanna play a trick on a newbie in your family who is new to computers? This is a cool trick to play. By this tweak, you will be able to disable the right click on the desktop or any icons/files/folders/applications... But right click will work on taskbar of the start button and registry. So, dont worry!!!
Open your registry and you will see all unknown files like HKEY_CLASSES_ROOT....... and so on. Don't panic. Follow this path.
HKEY_CURRENT_USER>SOFTWARE>MICROSOFT>WINDOWS>CURRENT VERSION>POLICIES>EXPLORER
On the right side of the registry, you will see two files(in general) named 'default' and 'NoDriveTypeAutoRun'. Right click on the empty space in the registry and goto New>DWORD VALUE and name it as "NoViewContextMenu". Remember, no spaces and N,V,C,M should be capitals. Right click on this and click modify. The default value will be 0. Change it to 1. Note: DONOT CHANGE THE HEXADECIMAL TO DECIMAL. Click OK. Close your registry and logout. Bingo!!! Once you login again, right click wont work. Your friend will be perplexed and the next thing he/she does is call the system administrator not knowing that not all system administrators will be knowing about registry. Now, to enable it again. follow the same path and set the value to 0. Logout and then login to see the effect.
2) Reverse the mouse buttons
This is a cool trick to play on newbies. Actually, there are two ways to do this. One is changing the settings in the Control panel and the other is through editing registry. You can do it either way. But I prefer the second way, which is challenging.
(i) Through Control Panel - goto Start> Control Panel> Printers and other hardware> Mouse. In Button configuration, enable the switch primary and secondary buttons option and click OK. But remember, you have just swapped the mouse buttons. So, for OK, you have to click the right mouse button. The newbie will be perplexed. Well, this trick is good for left handers.
(ii) Editing the registry - By default the left mouse button is the primary and the right is secondary. Open your registry and follow this path:
HLEY_CURRENT_USER>Control Panel>Mouse and on the right side of the registry, create this String value(REG_SZ): 'SwapMouseButtons' and set its value to 1. Bingo!!! You are done. Log out/Restart the computer.
You can try this: Combine tricks 1 and 2. That means, this will result in swapping of the mouse buttons and disabling the left click(once the buttons are swapped). User is ready to call system administrator cuz he feels that the system is behaving wildly.
> How to Disable CD Burning
The user can't burn any CDs by this trick. This restriction will disable the use of the inbuilt CD recording functions of Windows.
Open your registry and follow this path:
HKEY_CURRENT_USER>Software>Microsoft>Windows>Current Version>Policies>Explorer
and create this key: "NoCDBurning" and set its value to 1. Close you registry and logout/restart your system for the change to take the effect.
> How to Hide the drives(c:,d:,e:,...etc) in Ur Computer
1.Go to start->run.Type regedit.Now go to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
Now in the right pane
create a new DWORD item and name it NoDrives (it is case sensitive).
Now modify it's value and set it to 3FFFFFF (Hexadecimal) .
Now restart your computer.
So, now when you click on My Computer, no drives will be shown(all gone...).
To enable display of drives in My Computer, simply delete this DWORD item that you created.Again restart your computer.You can now see all the drives again. Magic........lol....
Sunday, April 27, 2008
> Reboot Windows After a Crash or if the blue screen is Displayed (Windows NT/2000/XP)
Create a new DWORD value, or modify the existing value, called "AutoReboot" and set it according to the value data below.
Exit your registry; you may need to restart or log out of Windows for the change to take effect.
| (Default) | REG_SZ | (value not set) | |||
| AutoReboot | REG_DWORD | 0x00000001 (1) | |||
| HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashCon... | ||
Value Name: AutoReboot
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = disabled, 1 = auto reboot) [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl]
Disclaimer: Modifying the registry can cause serious problems that may require you to reinstall your operating system. We cannot guarantee that problems resulting from modifications to the registry can be solved. Use the information provided at your own risk.
Friday, April 25, 2008
> Troubleshooting "My Computer" Opening Slowly on Windows XP
This problem is easily solved, and most of you are probably familiar with the fix already, but we'll go through it anyway.
Open up Folder Options from the Tools menu in Windows Explorer:
Then choose the View tab:

Uncheck the box for "Automatically search for network folders and printers", and close the dialog.
The changes should be immediate, and your problem should be gone.